Basically, the dishwasher is a robot that cleans and rinses the dirty dishes. Humans have to load the dishes, including detergent, set the proper washing cycles and turn it on, but dishwasher accomplishes a whole series of functions by itself. So, In this post, we will explain to you about How Dishwasher Works.
How Dishwasher Works Steps
Step #1 Filling
- After dipping dishes in soap and selecting the proper cycle, the bottom basins of the device starts to fill with water.
- This water is heated with the warming element to about 130 °F.
- The bottom float of the basin ensures that the basin does not overflow. In case, your appliance overflow, this float may be inoperative.
- If the water comes to a certain point, the float will reach the needed water level and turn the valve fill off.
- When the water reaches the exact temperature, it’ll spray onto loads.
- If the water isn’t correctly warm, it could be an error in the heating element.
Step #2 Pumping and Spraying
- A pump will use heated water from the dishwasher basin spray into the spray arms.
- So, the water circulates through small holes in the spray arms at high pressure.
- Arms are spraying heated water onto loads.
- The motor doesn’t force the arms to rotate.
- This water has continuously used as it falls back to the warewasher basin, and it’s pumped through the spray arm once more.
- The strongly pressurized water sprays onto loads, eliminating the stuck-on food.
- A filter filters food remains, and they will not get reused and pumped inside a spray arm.
- However, if you don’t clean your appliance, food can still get pumped inside the warewasher’s spray arms, decreasing the efficiencies of the device.
- That’s why is critical to control and clean your filter frequently.
Step #3 Cleaning
- After a few rotations, related to the cycle you select, the device computer will open the detergent dispenser.
- The soap that you have put inside the dishwasher will drop out and mixed with the water, giving the extra cleaning power.
- Consider, to use only the dishwasher-approved chemicals.
Step #4 Rinsing and Drying
- The spray arms will carry on to spray the water that has heated by the basin’s heating element.
- This warm water will rinse off the detergent and any remaining food that is on the loads.
- After the cycle ends, the dirty dishwater is drained out by the drain line pump.
Step #5 Dry Cycle
- The heating element boosts the warewasher’s temperature to turn the resting water into steam, which has then vented out of the machine.
- You have done the entire washing method and have a cleaned and dry dish.